Short Cycle Lamination Press Machine for Melamine Boards
Qiangtong short cycle lamination press is used for pressing flooring, furniture, and door skin by laminating melamine paper on raw board.
The short cycle lamination press machine can produce different sides of the product, such as 4×8, 4×9, 6×8, 6×9 feet.
If you want the deep surface texture like embossed design, you must choose this kind of short cycle press machine.
- Video
- Clients
Send Inquiry Today
Short Cycle Melamine Lamination Press Machine
Qiangtong short cycle melamine lamination press machine usually has two kinds; one is a single face laminated machine, another is double faces laminate machine. Customers who choose single face laminating press are generally made of furniture trim panels. The panels are mainly low-density particleboard or medium density boards.
The low density of the panels is low cost because the furniture trim panels do not need to withstand high pressure, so there is no need to choose high MDF.
MDF and PB are not high in tonnage due to low density, and the general pressure does not exceed 1400 tons.
The single veneer can be calendared or embossed, and the thickness of the furniture panel will not exceed 15mm (medium density board) 16mm (planning board). The pressure relief is generally made of MDF, and the shallow embossing is thick, and the embossing is a little deeper.
Qiangtong short cycle melamine lamination press machine has disadvantage of single-sided relief, it is easy to warp and deform, and if the decorative paper is not good, the surface texture will crack.
Therefore, it is best to press both sides of the relief.
The customers who choose double faces short cycle melamine lamination press machine are generally pressed and reinforced, and also have decorative plates.
The advantage of Qiangtong short cycle melamine lamination press machine is that the pressing speed is fast, the main cylinder is placed on the top, the closing time of the press is less than 3 seconds, and the pressing time is 5~6 seconds.
The car is sent to the board for 10 seconds. Generally, 1500 sheets (24 hours, three shifts) can be used for pressing the laminate flooring in a day.
Flat floors are commonly used for 1400 ton presses, and V-grooves or hand-grained floors require 2,400 ton or 2,800-ton presses.
The main features of the double faces short cycle melamine lamination press machine are high efficiency, high speed, labor saving, and longer life.
The steel used in Qiangtong short cycle melamine lamination press machine has been subjected to aging treatment, and the force is more uniform, and the improved press frame is more reasonable, which increases the strength and fatigue life and makes the frame life last longer.
At the same time, the mainframe adopts CNC numerical control machining to reduce the risk of frame fracture caused by fatigue stress.
The new double faces short cycle melamine lamination press machine has better insulation and a more stable and faster hydraulic system.
The new synchronous lever mechanism ensures that the upper and lower sides of the press plate are strictly parallel and not easily detached.
The daily output of the hot press for pre laminated boards can reach 1200 to 1500 sheets.
Qiangtong short cycle melamine lamination press machine has manual model and automatic model. The automatic model means short cycle press line which is consists of cleaning unit, automatic loading unit, press unit, automatic unloading unit, auto trimming unit and automatic stacking unit etc. It can be customized by different requirements.
Get an instant quote on Qiangtong short cycle melamine lamination press machine.
